Skip to content
DRIZORO
Contact Us
MaxEpox® Primer W
Primers

MaxEpox® Primer W

Water-Based Epoxy Primer For Polyurethane, Polyurea And Epoxy Coating Systems

Pack
  • Two-component A: 10 KG PAIL B: 20 KG PAIL
Contact SalesSend InquiryRequest SampleDownload Datasheet

Presented by FIAN GROUP within the scope of its commercial relationship with DRIZORO. Please refer to the official technical specifications and application guidelines before use. Legal Disclaimer

Type
Water-Based Epoxy Primer For Polyurethane, Polyurea And Epoxy Coating Systems
Color
Grey
Coverage
0.20–0.30 kg/m² per coat. Highly porous substrates may require two or three coats.
BackAll Products

Product Description

MaxEpox® Primer W is a two-component, water-based epoxy formulation, designed as primer for polyurethane, polyurea and epoxy coatings to be applied on concrete, mortar, metal substrates, etc in execution of waterproofing and flooring jobs.

Applications

Primer For New SubstratesPrimer For Existing SubstratesConcrete PrimerCementitious Surfaces PrimerMetal PrimerBrick PrimerCeramic Tile PrimerPolyurethane Coatings PrimerPolyurea Coatings PrimerEpoxy Coatings PrimerRoofs WaterproofingTerraces WaterproofingWater Reservoirs WaterproofingChannels WaterproofingSubstrate PreparationFloor RepairIndustrial FlooringIndustrial Areas WaterproofingParking WaterproofingShopping Centres WaterproofingHangars WaterproofingBridge Decks PrimerPolyurea Primer CoatingBridge Decks Waterproofing

Specifications

Type
Water-Based Epoxy Primer For Polyurethane, Polyurea And Epoxy Coating Systems
Available Colours
Grey

CE Marking, EN 1504-2 — Epoxy primer for epoxy, polyurethane and polyurea systems.
Technical Bulletin No. 372.01 · Mixing ratio A:B = 5:1 by weight

How to Apply

How to Apply
Premix each component separately, then pour the whole of component B into component A and mix with a low-speed drill (300–400 rpm maximum) for 2–3 minutes until uniform in colour. Apply by short-hair roller, brush or airless spray onto a sound, clean, slightly textured substrate; surface moisture up to 10 % is acceptable but not free standing water. Pot life is about 2 hours at 20 °C. Allow 12–24 hours until fully dry and tack-free before applying the epoxy, polyurethane or polyurea coating. Do not apply below 10 °C.

Packaging

Two-component A: 10 KG PAIL B: 20 KG PAIL

Product Inquiry

Send your requirements and the DRIZORO team will respond.