Skip to content
DRIZORO
Contact Us
MaxJoint® Elastic
Joint Sealants

MaxJoint® Elastic

Elastic Mortar For Sealing Joints And Cracks Subject To Movement In Concrete And Masonry

Pack
  • Two-component A: 5 KG PAIL B: 10 KG PAIL
Contact SalesSend InquiryRequest SampleDownload Datasheet

Presented by FIAN GROUP within the scope of its commercial relationship with DRIZORO. Please refer to the official technical specifications and application guidelines before use. Legal Disclaimer

Type
Elastic Mortar For Sealing Joints And Cracks Subject To Movement In Concrete And Masonry
Color
Grey / White
Coverage
Approx. 0.125 kg per linear metre for a 10 × 10 mm joint. One kilogram fills about 0.79 litres of joint volume.
BackAll Products

Product Description

MaxJoint® Elastic is a two-component product. Component (A) is a liquid based on special synthetic resins. Component (B), supplied in powder form, is a mortar based on a mixture of cements, additives, and special aggregates. When both components are mixed, an elastomeric product with high bond strength is achieved, suitable for sealing joints and cracks in concrete, pre-cast elements, mortars, and
masonry.

Applications

Precast Concrete Joints SealingPipelines Joints SealingWater Reservoirs Joints SealingWater Treatment Plants Joints SealingVertical Joints SealingFacades Joints SealingBuilding Joints SealingActive Cracks RestorationConcrete Cracks RestorationMasonry Cracks RestorationMovement Joints TreatmentMovement Subjected Surfaces Treatment

Specifications

Type
Elastic Mortar For Sealing Joints And Cracks Subject To Movement In Concrete And Masonry
Available Colours
Grey / White / Ivory / Yellow / Blue / Tile / Red / Jade Green / Brown / Black

CE Marking, EN 15651-1 — Sealant for façade elements, type F INT-EXT, class 7.5P. Test standards: EN ISO 868 (Shore A hardness) · EN 28339 (tensile strength, secant modulus and elongation at break) · EN 27389 (elastic recovery). Suitable for contact with drinking water per Directive (EU) 2020/2184 and Spanish RD 3/2023.

How to Apply

How to Apply
Mix components A and B at a 1:1 ratio by weight using a low-speed drill for 2–3 minutes, let the mix rest for 5 minutes, then apply by trowel or gun onto a damp surface, filling the joint completely and smoothing as required.

Packaging

Two-component A: 5 KG PAIL B: 10 KG PAIL

Product Inquiry

Send your requirements and the DRIZORO team will respond.