Skip to content
DRIZORO
Contact Us
MaxPlug®
Concrete Repair

MaxPlug®

Quick-Setting Hydraulic Mortar For Stopping Leaks Under Pressure

Pack
  • 25 KG PAIL
Contact SalesSend InquiryRequest SampleDownload Datasheet

Presented by FIAN GROUP within the scope of its commercial relationship with DRIZORO. Please refer to the official technical specifications and application guidelines before use. Legal Disclaimer

Type
Quick-Setting Hydraulic Mortar For Stopping Leaks Under Pressure
Color
Grey
Coverage
One kilogram fills about 0.615–0.620 litre of cavity (approx. 1.62 kg per litre), depending on the amount of mixing water.
BackAll Products

Product Description

MaxPlug® is a quick-setting cement-based mortar that instantly stops running water from cracks, fissures, holes or other openings in concrete and masonry. It is non-shrink and sets within three to five minutes depending on the temperature. Once MaxPlug® sets, it
adheres perfectly to the substrate. It only requires water for mixing.

Applications

Water Leaks SealingConcrete Leaks RepairMasonry Leaks RepairCracks And Holes SealingConcrete Water Pipes RepairConcrete Pipes RepairHydrostatic Pressure ProtectionGas Leaks SealingConcave Corners SealingConstruction Joints TreatmentGrooves FillingBolts AnchoringMetal Accessories AnchoringImmediate Use FixingRunning Water StoppingBasements WaterproofingTunnels WaterproofingFoundations WaterproofingSewers WaterproofingHome Maintenance SolutionsIndustrial Maintenance Solutions

Specifications

Type
Quick-Setting Hydraulic Mortar For Stopping Leaks Under Pressure
Available Colours
Grey

CE Marking, EN 998-1 — Industrial mortar for rendering and plastering, general purpose (GP).

How to Apply

How to Apply
Clean the crack or fissure and open it to a minimum depth of 4 cm and a width of 3–4 cm, avoiding a V shape. Dampen the surface if no water is present. Add clean water slowly — about 0.28 litre per kilogram — and mix with a trowel to a mortar consistency. Mix only the quantity that can be applied immediately: form the material into a plug shape and, once it starts to warm, press it firmly and without friction into the crack or hole, holding it in place for about 2 minutes until it hardens; setting takes 3–5 minutes depending on temperature.

Packaging

25 KG PAIL

Related Products

Product Inquiry

Send your requirements and the DRIZORO team will respond.