Skip to content
DRIZORO
Contact Us
MaxPatch® M Fino
Decorative & Finishing Systems

MaxPatch® M Fino

Cosmetic One-Component Mortar For Continuous Decorative Finish Of Concrete Floor In Minimum Thickness

Pack
  • 25 KG BAG
Contact SalesSend InquiryRequest SampleDownload Datasheet

Presented by FIAN GROUP within the scope of its commercial relationship with DRIZORO. Please refer to the official technical specifications and application guidelines before use. Legal Disclaimer

Type
Cosmetic One-Component Mortar For Continuous Decorative Finish Of Concrete Floor In Minimum Thickness
Color
Grey / White
Coverage
Approx. 2.0 kg/m² per mm of thickness (a 25 kg bag fills about 12.5 litres). Layer thickness 1–5 mm over surfaces previously levelled with MaxPatch® M.
BackAll Products

Product Description

MaxPatch® M Fino is a one component cement-based mortar with selected aggregates and special additives. Once mixed with water, provides a mortar of high mechanical performance (adhesion, abrasion resistance and compression) and suitable for cosmetic/decorative finish of continuous pavements from 1 to 2 mm
thickness, on previously levelled surfaces with MaxPatch® M

Applications

Indoor Flooring FinishExterior Flooring FinishShopping Malls FinishParks FinishPlaygrounds FinishSwimming Pools FinishFountains FinishContinuous Flooring FinishJoint-Free FinishColoured Pavements FinishResidential Buildings FinishHotels FinishSaunas And Spas FinishConcrete Steps RepairConcrete Stairs RepairGranite Kitchens RepairBars FinishRestaurants Finish

Specifications

Type
Cosmetic One-Component Mortar For Continuous Decorative Finish Of Concrete Floor In Minimum Thickness
Available Colours
Grey / White / Other colours upon special request

CE Marking, EN 1504-3 — Polymer-modified hydraulic cement mortar (PCC) for non-structural repair of concrete, class R3. Covered by the same Technical Bulletin No. 333.02 as MaxPatch® M (maximum aggregate size < 0.4 mm).
Principles/Methods: 3-CR/3.1 (mortar applied by hand)
EN 12190 · EN 1542 · EN 13295 · EN 13412 · EN 13687-1/-2/-4 · EN 13057 · EN 1015-17

How to Apply

How to Apply
Same procedure as MaxPatch® M but with a finer aggregate (< 0.4 mm) for a jointless decorative finish. Saturate the substrate with water, mix a 25 kg bag with 3.5–4.0 litres of clean water (14–16 % by weight) for 2–3 minutes with a slow-speed drill (400–600 rpm), brush on a bonding slurry and trowel the mortar in layers of 1–5 mm over a substrate previously levelled with MaxPatch® M. Pot life about 20 minutes; do not add extra water.

Packaging

25 KG BAG

Related Products

Product Inquiry

Send your requirements and the DRIZORO team will respond.